get_the_title
  • Robert-Bosch-Straße 3, 49632 Essen (Oldb.) Germany
  • +49 5434 82 0
  • www.miavit.com



Botanicals, same same but different Part 1

It is widely known that certain plants or parts of plants can have an effect on the well-being and performance of animals. This can be purely aromatic (vanilla) to make the taste of feed and water more attractive to the animals, but there are also direct effects on intestinal health (oregano) or the respiratory tract (thyme, mint).

In general, plants and their active substances can be added to feed or drinking water in the following forms:

  1. Extracts: These are extracts of plants obtained using solvents such as water, ethanol or propanediol. The solvent is then removed during processing. We differentiate between liquid and dry extracts.
  2. Tinctures: These are alcohol-based extracts from plant materials. Manufacturing processes usually involve maceration and percolation.
  3. Plant fats and oils: These are extracted by mechanical processes. The plant parts containing oil are either cold pressed or extracted using solvents.
  4. Plants and herbs: These refer to whole dried plants or parts of plants that are then milled.

These types of processing are selected to increase the concentration of active substances in the product, to standardise the content and to remove unwanted by-products (e.g. fibres, bitter substances). The type and manner of processing are just as decisive for the quality of a phytogenic additive as the selection of the plant material, cultivation, climate and time of harvest.

The European feed law makes the following distinction for the use of plant substances:

  • Aromatic substances as feed materials: Products of plant origin in their natural state, fresh or preserved, and products of simple processing can be classified as feed materials. These are plants and herbs that are dried or ground, or result from crushing. Example: Ground oregano.
  • Aromatic substances as feed additives:a. Chemically defined aromatic substances (substances that are chemically produced and are not found in nature. They have to be purified and have a certain degree of standardisation guaranteed by the manufacturer).b. Botanically defined aromatic substances (substances extracted from natural plants. They must have a degree of standardisation of the active substance guaranteed by the manufacturer). Example: Oregano approved as oil or tincture.
  • Zootechnical additives: Additives that have a positive effect on the performance of healthy animals or on the environment. Example: Preparations from oregano oil and other aromatic substances.

 

Same same, but different Part 2

NATURAL, NATURE-IDENTICAL, SYNTHETIC

Natural is always better! This is the common opinion of many consumers when it comes to the use of additives such as essential oils, flavours and extracts. Buy what do these three terms actually mean and is it really true that “chemical” is bad? To answer this question, let’s consider the example of the increasingly popular essential oils and aromas.

Essential oils are the volatile components of plant materials and can be composed of more than 50 different individual chemical compounds. Each oil has a, generally high, concentration of the major components typical of its kind; these have a significant impact on the character and, often, on the effect of the oil. Oils are classified as follows:

  • Natural:

An essential oil is natural if it is obtained from a defined source of subspecies and is not blended with oils from other plants or synthetic additives. This means, for instance, that natural thyme oil must be obtained from thyme only in order to be deemed natural.

Natural oils thus have a unique and very complex composition of very concentrated major components and many unique minor components, often in low concentration. Despite their low concentration, these are what give the oils their unique character and are therefore considered part of their “fingerprint”. However, they do not guarantee the specific effectiveness of the oil, as not all the ingredients necessarily contribute to its activity and some can even weaken it.

  • Nature-identical:

A nature-identical essential oil can be composed of natural and/or nature-identical ingredients. This means, for instance, that a particularly rare or expensive oil can be reconstructed from a targeted mix of other natural oils. These may, but need not, also contain individual ingredients of synthetic origin that must in turn only be substances that exist in nature. So the results are not necessarily purely chemical, but a reconstructed mix of different sources, usually for organoleptic reasons. If synthetic substances are used, these must be the same molecules that occur naturally in the plant.

Such manufacturing means, firstly, that quality can be maintened independently from agricultural events (e.g. droughts). Furthermore, there are price advantages to this method of manufacturing as it can, if needed, do without plants that are not widely available, delicate or difficult to cultivate.

A further advantage is that this method of manufacturing can “boost” some ingredients and remove other undesirable ones, e.g. bitter ingredients. On the other hand, the absence of the exclusive ingredients that are often present in natural oils in low concentration is a drawback of nature-identical oils, as it also reduces potential synergistic interactions.

  • Synthetic:

Synthetic oils contain molecules that do not exist in nature but have organoleptic properties that are often similar. These are especially used as aromas and flavoring. A typical example is ethylvanillin, which does not occur in vanilla pods, where it is found as methylvanillin. And yet it has the recognisable taste of vanilla.

The question remains: which oil is better?! Unfortunately, the question isn’t easily answered just based on the origin. The decisive factors for the oil’s effect, besides the total quantity of the essential oil (dose -> esponse, see Paracelsus), are the major substances that can be found, often in high concentrations, in both naturl an natureidentical good quality oils. In both cases, these can be combined synergistically and the effectiveness at this point is similar for both.

The unique range of ingredients in natural oils means that these also have potential for further interactions. However, their role and influence on the oil’s effect have not yet been fully clarified.

Both positive and negative effects, such as higher toxicity, are known. In contrast, the effectiveness and interactions of many major substances are often already well proved (e.g. carvacrol + thymol + linalool in oregano oil). In addition, these exclusive ingredients are only present in low contrations, which in itself can relativise their effect.

This means that natural oils, in addition to the effect of the major substances, also have potential for as yet unknown interactions (negative & positive) but, on the other hand, they are generally more expensive and less standardised. So, there is no definite answer to the question of which has the best quality; in the end, economic and scientific factors must be considered to find the best oil for a particular application.



MAGAZINE AVINEWS INTERNATIONAL +

COMPANY NEWS

 

MAGAZINE

 


See other editions


 

Register to our International Newsletter

Get full access to our digital magazines and newsletters filled with contents by experts.



logo

Agrinews communication group

Privacy Policy
Cookies Policy